I was trying to make a phone holder but ended up ruining it. With the leftover wood, I decided to make a pen holder. I did not bother with making it look good or planned out, since it was a spur-of-the-moment thing. Turned out better than I thought it would.

• 3/4 Thick Goodlumber
• Wood Glue
• Sand Paper

• Block Planer
• Crosscut Saw
• Knife
• Pencil
• Combination Square
• 4-in-1 Chisel Set
• Mallet

Measure Twice, Cut Once: I thought of making one of the boards a bit longer, that way I would just remove the excess afterwards. Turns out, it was going to be really hard to remove the excess, so I just decided to keep it as an "aesthetic".